New Items

B o w and buckle

Vsi aggregates are cubical in shape and do not have flaky and elongated aggregates. VSI we are better than normal aggregates. All crusher are now VSI, Pack of 40. Big Bag Stone 90x90x90 cm SWL 1500kg,Big Bag Pp fabric bag stone: Dimensions: 90 x 90 x 90 cm Material: Unbeschichtetes PP woven fabric Design: 4 x PP Hebeschlaufen with 25 cm FULL LENGTH Without lid, open at the top, head stitching seams Closed base SWL (safe working load 1,500 kg, SF 5: 1 The product shown in the image may deviate slightly in production. (SWL (safe working load = safety Weight Load, SF = safety factor)

Automatic Injectable Powder Filling & Rubber Stoppering Machine having eight ports in a powder wheel.  

The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. 

Shree Ganesh Pharmatech offers two models in this machine, first is Automatic Single Wheel Injectable Powder Filling & Stoppering Machine which provides output up to 7000 vials/hour and second is Automatic Double Wheel Injectable Powder Filling & Stoppering Machine provides output up to 14000 vials/hour. 

All contact parts made for Good housekeeping and complies as per current good manufacturing practice.

• Production Capacity: 30mg to 4 gms Filling Range
• Delivery Time: 3 Month

The incoming dry container sterilized are fed through the Unscrambled and suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel. The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved.
The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one. The filled containers are immediately separated on the conveyor by vial separator and moves further for Stop Pering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing systems). The sterilized, silicon zed, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the container is passed between two pressing roller for tight fit fixing of rubber stopper.

echnical Specification

• Delivery Time: 2

• No Bottle – No Fill System prevents the wastage of powder
• Total Compact cGMP model
• All powder contacted parts are made of 316- stainless steel
• 304-stainless steel is used in machine construction ensures sturdiness
• Easy Cleaning / Autoclaving / Sterilization of all moving parts
• +/- 2% to 3% may differ based on powder AC Variable Frequency Drive Speed Control to adjust machine speed
• Turn table is equipped with the separate drive to control speed
• Low Air – automatic Machine Stop System
• Supreme quality imported Gear motor for driving conveyor
• Used for 30 to 120 ml bottle diameter without any change in machine

• Production Capacity: 5gms to 1 Kgs
• Delivery Time: 1 Month

The Automatic Cap Sealing Machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.

Operation:
The feed container moving on conveyor belt are fed into star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head. Where the sealing head is performing perfect operation of threading & sealing.

Salient Features:

• No container No cap arrangement.
• SS elegantly matt finished body.
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Low noise level, low power consumptions.
• Self-lubricating guide profile for low friction wears surface, smooth and noiseless conveying.
• SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against corrosion.
• Synchronized A/C drives to synchronize, Conveyor, Star wheel and Platform turret & capping bowl.
• Adjustable bottle height gauge for easy and quick setting. 

Technical Specifications:

Input Specification:

* Depends on bottle size, cap size and type of cap.
** We can supply as per customer requirements.
*** With help of change parts.Utility Requiremen

• Delivery Time: 1

The dump loading procedure may be used, if the ampoules/vials are received in ready to dump boxes, which will have exactly into the same number of ampoules/vials and the pitch, as the loading tray. Alternatively, each ampoules/vial have to be arranged into the tray.

The loading trays are placed directly in to the machine & the handle bar is lowered for automatic centering of washing needles in to the ampoule /vial mouths. The top cover is also lowered & switch is operated for automatic sequential washing both from inside & outside of each individual ampoule /vial.

The machine will automatically stop after one complete cycle & for removal of trays, reverse procedure is to be observed. Depending on dump loading or individual loading & operator’s efficiency one can derive as high as 30 to 40 loadings of tray per hour.

Salient Features:

• Very simple & robust construction for a long life and a continuous service.
• Positive & Pressurised jets through washing needles for high pressure cleaning at minimum usage of washing medias.
• Sound design concept of pressure tanks for reserves & continuous supply of washes medias.
• Both internal & external washing ensuring absolutely clean ampoules/vials after sequential washing.
• Acrylic top cover for clear view of washing events taking place in the machine.
• On line Poly carbonate hosing with P.P. Replaceable filter cartridge, of 10 microns for water & 5 microns for air, for best possible washing. All contact parts of washing media & Compressed air are of S.S. 304 or HDPE or POLY Carbonate or P.P.
• In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point, when cover is pushed down. 

• Delivery Time: 1